From the model fitting results, it is found that, at a higher light intensity, a higher specific Chl production rate accompanied by a higher S. platensis biomass is obtained. However, as for Phy production, a higher biomass results in a lower specific Phy
production rate. The only exception is the use of blue light, which shows a positive effect on both Chl and Phy production rates under a higher light intensity. (C) 2010 Elsevier B.V. All rights reserved.”
“Background: Currently, population pharmacokinetic (PK) studies of anti-malarial drugs are designed primarily by the logistical and ethical constraints of taking blood samples from patients, and the statistical models that are fitted to the data are not formally considered. This could lead to imprecise estimates of the target PK parameters, and/or designs insufficient to estimate all of the Nepicastat chemical structure parameters. Optimal design methodology has been developed to determine
blood sampling schedules that will yield precise parameter estimates within the practical constraints of sampling the study populations. In this work optimal design methods were used to determine sampling designs SNS-032 datasheet for typical future population PK studies of dihydroartemisinin, the principal biologically active metabolite of oral artesunate.
Methods: Optimal designs were derived using freely available software and were based on appropriate structural PK models from an analysis of data or the
literature and key sampling constraints identified in a questionnaire sent to active malaria researchers (3-4 samples per patient, at least 15 minutes between samples). The derived optimal designs were then evaluated via simulation-estimation.
Results: BMS-345541 price The derived optimal sampling windows were 17 to 29 minutes, 30 to 57 minutes, 2.5 to 3.7 hours and 5.8 to 6.6 hours for non-pregnant adults; 16 to 29 minutes, 31 minutes to 1 hour, 2.0 to 3.4 hours and 5.5 to 6.6 hours for designs with non-pregnant adults and children and 35 to 59 minutes, 1.2 to 3.4 hours, 3.4 to 4.9 hours and 6.0 to 8.0 hours for pregnant women. The optimal designs resulted in acceptable precision of the PK parameters.
Conclusions: The proposed sampling designs in this paper are robust and efficient and should be considered in future PK studies of oral artesunate where only three or four blood samples can be collected.”
“Acoustic Radiation Force Impulse (ARFI) imaging is a novel ultrasound-based elastography method that is integrated in a conventional ultrasound machine enabling the exact localization of measurement site. It might present an alternative method to transient elastography for the noninvasive assessment of liver fibrosis. At present, studies with small patient population have shown promising results.