To test sclerotia for germination, they were collected from six w

To test sclerotia for germination, they were collected from six weeks old agar Tanespimycin supplier plates, rinsed for one minute in 70% [v/v] ethanol, and washed twice for 1 minute with sterile water. After transfer into Petri dishes filled with wet, sterile vermiculite, the sclerotia were frozen for 24 hours at -8.5°C and subsequently incubated at 20°C for one week under ambient light. Test for mycelium

wettability To obtain sporulating mycelium, HA and tomato malt agar plates were inoculated with a spore suspension and incubated for 12 days at ambient light. To produce non-sporulating mycelium, tomato malt agar plates were incubated for 4 days in a humid box in the dark. Aerial mycelia were overlaid with 20 μl droplets STI571 solubility dmso containing 50 mM EDTA and different concentrations of SDS [6], and incubated for up to 24 h in a humid box. Tests were performed in duplicates. Mycelia were evaluated as not wetted, if the droplets remained visible and were not absorbed by the aerial hyphae after the indicated incubation times. Scanning electron microscopy of B. cinerea conidia Dry conidia from hydrophobin mutant strains were harvested from sporulating mycelium. For low-temperature scanning electron microscopy (LTSEM) spores were mounted on sticky sample holders and plunge-frozen in nitrogen slush. Samples were transferred into the Alto 2500 (Gatan, Oxford, UK) vacuum preparation find more chamber (pressure < 2 × 10-4 Pa). Next they were

sputter-coated with a 10 nm platinum layer prior to transfer

on the SEM cryostage built into an S-4700 field emission scanning electron microscope (Hitachi, Tokyo, Japan). SEM micrographs were digitally recorded after samples were stabilised at 148 K at an acceleration voltage of 3 kV. Bioinformatic analyses Nucleotide and amino acid sequences of the B. cinerea hydrophobins were taken from the databases of the Broad Institute (http://​www.​broadinstitute.​org/​annotation/​genome/​botrytis_​cinerea.​2/​Home.​html) and URGI (http://​urgi.​versailles.​inra.​fr/​index.​php/​urgi/​Species/​Botrytis/​Sequences-Databases). For amino acid sequence alignments the programs ClustalX 1.83 (ftp://​ftp-igbmc.​u-strasbg.​fr/​pub/​ClustalX/​) [48] and GeneDoc 2.5 (http://​www.​nrbsc.​org/​) [49] were used. Morin Hydrate Hydropathy plots were calculated with ProtScale (http://​www.​expasy.​ch/​cgi-bin/​protscale.​pl) [50] and drawn using Microsoft Excel. Prediction of signal sequences for secretion was performed using SignalP 3.0 (http://​www.​cbs.​dtu.​dk/​services/​SignalP/​) [51, 52]. GRAVY values were computed with ProtParam (http://​www.​expasy.​ch/​tools/​protparam.​html) [50]. Acknowledgements We are very grateful to Sabine Fillinger for generously providing us with fruiting bodies. We also thank Andreas Böhm for advice. This project was supported by the German Science Foundation (DFG: HA1486/5-1). Electronic supplementary material Additional file 1: Hydrophobins and hydrophobin-like proteins encoded in the genomes of B. cinerea and S.

Comments are closed.